Webinar on OSHA Violations

Life after an OSHA Citation: Turning a Black Mark into a Better Workplace



OSHA citations happen: the agency conducted 35,000 inspections in 2015 and cited 65,000 violations for a range of common hazards. The facilities that come back strongest from a citation are the ones that go beyond hazard correction to establish a culture of safe work practices.

Menu
Casing Machinery

Casing Machinery

This online course covers operating characteristics and service techniques of accessory or auxiliary machines used with packaging lines. Describes general operating characteristics of labeling equipment, uncasing, unscrambling, and cleaning machines, gluing equipment and adhesives, wrapping machines, tying, strapping, and stitching machines, and shrink wrapping devices. Casing Machinery is available in online and course manual formats.

TPC Training Systems is authorized by IACET to offer 1.0 CEUs for this program.

Review a full course list for Multi-Craft Maintenance Technician

Select Format

  • Course Manual $71.00

Please select a format.

Lesson 1 - Uncasing and Unscrambling

Topics:

Manual uncasing; Low-volume uncasing and unscrambling; Unscrambling with conveyors; Automatic uncasing; Conveyor chain and care

Learning Objectives:
– List the steps that must occur before an empty container can be processed.
– Tell which types of conveyors are typically used for unscrambling.
– Explain how the pickup head of an automatic uncaser grips different container shapes.
– List important steps in the periodic care and maintenance of roller chain.


Lesson 2 - Cleaning and Washing

Topics:

Air cleaning; Manual washing with water; Bottle washer/rinser; Metal washers; Container warming; Pasteurization; Maintenance

Learning Objectives:
– Name the two methods by which containers are usually cleaned.
– Describe the automatic air cleaning operation.
– Describe the operation of an automatic bottle washer and rinser.
– Describe the operation of a high-production bottle washer.
– Explain why pasteurization is important.


Lesson 3 - Gathering Machines

Topics:

Multi-packing machines; Skip-carton detector; Continuous-run accumulator; Stacking sequence; Cycling operations; Case packing, bundling machines; Maintenance

Learning Objectives:
– Name the three types of gathering machines currently in use.
– Describe the operation of a bundling machine.
– Describe the infeed supply operation and cycle of a multipacker.
– Name the two functions of a typical case packer.
– Explain your most important responsibility in gathering machine maintenance.


Lesson 4 - Cartoning Machines

Topics:

Carton making; Types of cartons and machines; Glue-end cartons; Carton feeding; Product infeed; Machine attachments; Closing and gluing

Learning Objectives:
– Define the following terms: reverse tuck, arthur lock, and crash fold.
– Explain why butt flaps are rarely used.
– Describe the operation of cartoning machines and related carton feeding methods.
– Explain how cartons are typically closed and glued.
– List steps involved in cartoning machine maintenance.


Lesson 5 - Casing Machines

Topics:

Horizontal and vertical machines; Top, side, and bottom filling machines; Case taping machines; Heatshrink sealing; Maintenance

Learning Objectives:
– Tell how the manner in which cases are filled is determined.
– Explain the function of a compression unit.
– Contrast top filling and side filling machines.
– Explain the purpose and operation of electrical interlocks in an automatic casing machine.
– Identify the source of heat control problems in a shrink film machine.


Lesson 6 - Wrapping Machines

Topics:

Wrapping materials; Settings and controls; Paper feed; Paper corrugating wires, rollers, cutoff change gears, knife, feed belt, stops, and guides

Learning Objectives:
– Explain the function of registration dots on the continuous roll paper used on wrapping machines.
– Explain the functions of the paper corrugating wires in a wrapping machine.
– Trace the operation of a typical wrapping machine, including timing elements.
– Tell how to clear a jam in a wrapping machine.
– Describe various kinds of glue used in wrapping machines and their application.


Lesson 7 - Strapping and Stitching

Topics:

Strapping materials; Tensioners; Sealers; Combination tools; Strapping systems; Stitching machines; Stitch defects; Adjustments

Learning Objectives:
– Explain why a tensioner and sealer are sometimes combined into a single assembly.
– Describe the maintenance required by strapping heads.
– Explain the operation of a stitching machine.
– List common stitching machine problems and stitch defects and tell their probably causes.


Lesson 8 - Adhesives and their Application

Topics:

Properties and types of adhesives; Hot melts; Application systems; Troubleshooting, maintaining, and cleaning equipment

Learning Objectives:
– Define the terms penetration, tackiness, and viscosity as they relate to adhesives.
– Name the most likely source of trouble in hot melt application machinery
– List steps involved in servicing a hot melt dispensing head.
– Explain common maintenance items related to application equipment.
– Describe the storing and handling requirements for liquid adhesives.


Lesson 9 - Labeling and Coding

Topics:

Label forms; Continuous roll, indirect label feeding; Pressure-sensitive labeling, heads; Coding attachments; Flexographic imprinting

Learning Objectives:
– Name common problems in labeling operations and give their solutions.
– Describe the process of continuous roll feeding.
– Explain the periodic maintenance required of labeling heads.
– Explain the operation of a friction-driven coder and a flexographic imprinter.


Lesson 10 - Maintenance and Safety

Topics:

Planned maintenance; Spare parts; Lube schedules; Mechanical and electrical maintenance; Fluid components maintenance; Guards

Learning Objectives:
– Identify the key to good planned maintenance.
– Name the two most important factors in drive belt wear on a packaging machine.
– List items to consider when replacing a motor?
– Explain the purpose of recommended color codes for plant equipment.
– Name the leading causes of industrial injuries.

© Copyright 2017 TPC Training SYSTEMS. All rights reserved