Free Webinar

"The Future of Industrial Training: the New Digital Classroom"

About the Webinar:
At TPC Training Systems, we’ve been on the hunt for ways that our industrial skills training solutions can evolve to meet the needs of all of our customers, and we’ve learned some things in the process. In this webinar, we’ll share what we’ve learned and give you a preview of the future of industrial training.

You’ll learn about:
  • The best uses of webcast and simulcast training formats
  • The advantages of blended online and live training
  • Virtual reality (VR) training environments, including an exclusive sneak peek inside a VR simulation

  • Menu
    Making Measurements

    Making Measurements

    Covers units of measurement used in commercial and industrial applications. Examines all aspects of basic measurement concepts and procedures, including accuracy and tolerance. This online course discusses techniques and devices for comparison measurements (dial indicators and gauge blocks). Shows common methods for measuring volume, motion, force, temperature, fluid flow, and electricity. Explains how to use scales and rules, combination calipers, and micrometers. Making Measurements is available in online and course manual formats.

    TPC Training Systems is authorized by IACET to offer 1.0 CEUs for this program.

    Review a full course list for Millwright

    Select Format

    • Online Course & Test $85.00
    • Course Manual $71.00

    Please select a format.

    Lesson 1 - Units of Measurement


    Length; Area; Volume; Angles; Time; Speed and velocity; Mass and weight; Force; Work and power; Pressure; Temperature; Electricity

    Learning Objectives:
    – Identify various units of measurement.
    – State the definition of the joule, the coulomb, and the horsepower
    – Explain how to calculate pressure.
    – Explain the difference between mass and weight.
    – Demonstrate how to measure the volume of an object.
    – Explain the difference between the Celsius scale and the Fahrenheit scale.

    Lesson 2 - Metric Measurement


    Length, area, volume; Mass; Frequency; Speed and velocity; Acceleration; Force and weight; Work, energy, and power; Temperature; Current; Light

    Learning Objectives:
    – List the seven base units in the SI (metric) system.
    – Name three derived units.
    – Define work and power in SI units.
    – Explain what power is and how it is measured.
    – Name two metric measuring instruments and their U.S. Standard equivalents.

    Lesson 3 - Linear Measurement


    Units; Measurement error; Tolerances; Scales and rules; Scribers and dividers; Bevel gauge; Calipers; Combination square; Using a micrometer

    Learning Objectives:
    – List five units used for making linear measurements.
    – Demonstrate how to use a micrometer.
    – Explain what each head of a combination square is used for.
    – State the definition of parallax error.
    – Define the different types of tolerance.

    Lesson 4 - Comparison and Surface Measurement


    Gauge blocks; Measuring screw threads, radius, surface texture; Hardness testing; Testing surface coatings; Detecting defects

    Learning Objectives:
    – Explain the difference between a continuous dial and a balanced dial on a dial indicator.
    – State the definition of pitch on a screw.
    – Name two hardness tests.
    – Explain why nondestructive testing is preferable to destructive testing on surface coatings.

    Lesson 5 - Measuring Bulk Materials


    Storing and handling bulk solids; Conveyors; Measuring area, volume, weight, mass, density; Measuring lumber

    Learning Objectives:
    – Explain why weight-density and the angle of repose are important to workers who handle and store loose bulk material.
    – Name the two types of conveyors and list three specific examples of each type.
    – Name the three basic measurements of bulk materials.
    – Demonstrate how to find the radius of a circle, given its area, and how to find the area of a circle, given its circumference.
    – Demonstrate how to convert a typical order of lumber into board feet.

    Lesson 6 - Measuring Motion


    Relative motion; Displacement; Velocity; Acceleration; Average and instantaneous values; Motion on a curved path; Graphs of motion

    Learning Objectives:
    – Name the three measurements of motion.
    – State the definition of speed.
    – Explain the difference between average and instantaneous velocity.
    – Demonstrate how to interpret a graph of motion.
    – Explain of the velocity of an object is shown on a graph of motion.

    Lesson 7 - Measuring Forces


    How forces act; Combining forces; Force and torque measurement; Analyzing forces

    Learning Objectives:
    – Name both the metric and the U.S. Standard units of measurement for force, mass, and acceleration.
    – State the definition of force.
    – Demonstrate how to calculate torque.
    – State an advantage of using a balance instead of a scale.
    – Demonstrate how to draw a force diagram.

    Lesson 8 - Measuring Temperature


    Temperature and heat; Temperature-sensing materials; Thermometers; Pyrometers; Response time and accuracy

    Learning Objectives:
    – Explain the difference between heat and temperature.
    – Name four different scales for measuring temperature.
    – Explain the use of heat-sensitive pellets, crayons, and paints.
    – Explain how Bourdon tubes work.
    – Explain how a pyrometer works.

    Lesson 9 - Measuring Fluids


    States of matter; Measuring liquid level, viscosity, flow rate, volume of flow, specific gravity, pressure, humidity, density

    Learning Objectives:
    – State the definition of a fluid.
    – Describe how liquids differ from gases.
    – List the instruments used to measure the level of water.
    – Name two instruments that measure the flow of fluids, and explain how they work.

    Lesson 10 - Measuring Electricity


    Electricity; Electric circuits; Electrical units; Measuring current, potential difference, resistance, power; AC and DC measurements

    Learning Objectives:
    – List the parts of an atom.
    – Define potential difference.
    – Identify a wattmeter.
    – Describe the difference between alternating current and direct current.
    – Describe the difference between an ohmmeter and an ammeter.

    © Copyright 2017 TPC Training SYSTEMS. All rights reserved