Webinar on OSHA Violations

Life after an OSHA Citation: Turning a Black Mark into a Better Workplace



OSHA citations happen: the agency conducted 35,000 inspections in 2015 and cited 65,000 violations for a range of common hazards. The facilities that come back strongest from a citation are the ones that go beyond hazard correction to establish a culture of safe work practices.

Menu
Power Supplies

Power Supplies

Covers the four basic kinds of power supply conversions. Explains how to work with nonchemical cells as well as primary and secondary cells of various materials. Describes in detail the functions and operation of several kinds of rectifiers, filters, and voltage regulators and explains how they work together as power conditioners. Discusses basic tools, test devices, and procedures for troubleshooting to solve the greatest number of problems in the least amount of time.

TPC Training Systems is authorized by IACET to offer 0.5 CEUs for this program.

Review a full course list for Instrumentation & Control Systems Technician

Select Format

  • Online Course & Test $85.00
  • Course Manual $60.00

Please select a format.

Lesson 1 - Power Supplies and Power Conditioners

Topics:

Power supply and power conditioner functions; DC-to-DC, AC-to-AC, AC-to-DC, and DC-to-AC power supplies; Inverter feedback circuits; Power conditioners; Safety precautions

Learning Objectives:
– Discuss the basic functions of power supplies and power conditioners.
– Describe dc-to-dc, ac-to-ac, ac-to-dc, and dc-to-ac power supplies.
– Compare the operation of transformer-driven and oscillator-driven inverters.
– Discuss the functions of filters, voltage regulators, voltage dividers, switching power supplies, and ferroresonant power supplies.
– Explain why low voltages can be dangerous.

Lesson 2 - Cells and Batteries

Topics:

Electrochemical cells; Primary, secondary, lead-acid, nickel-cadmium, nickel-metal-hydride, and nickel iron cells; Maintenance, hazards, and precautions; Nonchemical cells

Learning Objectives:
– Explain the difference between a battery and a cell and identify symbols for each.
– Describe the parts of an electrochemical cell.
– Compare the characteristics and uses of Leclanché, high-energy, and alkaline carbon-zinc cells.
– Discuss battery-recharging problems and explain how to check for overcharging.
– Discuss ways to maintain and dispose of chemical cells and batteries safely.
– Discuss the use of five kinds of nonchemical energy sources and recent developments in cells and batteries.

Lesson 3 - Rectifiers

Topics:

Diode rectifiers and ratings; Parallel and series diodes; Half-, full-wave, bridge, and three-phase rectifiers; Voltage multipliers

Learning Objectives:
– Define the term rectifier.
– Explain how to interpret diode ratings on a manufacturer's specification sheet.
– Compare the effects of connecting diodes in parallel and in series.
– Describe the operation of a silicon-controlled rectifier.
– Compare the operation of half-wave and full-wave rectifiers.
– Discuss the operation of bridge and three-phase rectifiers and explain how voltage multipliers work.

Lesson 4 - Filters

Topics:

Kinds of filters; Ripple; Circuit components; Bleeder resistors; Bypass filters; Input filters

Learning Objectives:
– Name several kinds of filters used in power supplies.
– Discuss the effects of ripple and describe ways ripple is measured.
– Discuss the use of capacitors, inductors, and resistors in filter circuits.
– Compare the advantages and disadvantages of capacitance, inductance, RC, and LC power supply filters.
– Explain why capacitor power supplies should include bleeder resistors.
– Discuss the uses of bypass filters and input filters.

Lesson 5 - Voltage Regulators

Topics:

Voltage regulators; Shunt, series, integrated circuit (IC), switching, and primary circuit regulators

Learning Objectives:
– Discuss the purposes of voltage regulators in power supplies.
– Explain the function of the control circuit and the current limiting circuit in series voltage regulators.
– Discuss the advantages of IC voltage regulators.
– Describe the operation of switching regulators and explain how it differs from that of other kinds of regulators.
– Discuss the use of SCRs and triacs in primary circuit regulators.

Lesson 6 - Troubleshooting Power Supplies

Topics:

General approach; Preliminary checks; Power-off, power-on tests; Output tests; Section tests; Part tests

Learning Objectives:
– Discuss at least five kinds of test equipment and tools used to troubleshoot power supplies.
– Describe the three main steps in troubleshooting a power supply.
– Describe the basic procedures for preliminary checks and power-off visual inspection and fuse tests.
– Describe the basic procedures for power-on tests and output tests.
– Explain how to perform section tests and part tests.

© Copyright 2017 TPC Training SYSTEMS. All rights reserved