Show nav
  • Instrumentation/Control Systems Technician

Basic Pneumatics

Basic Pneumatics

The Basic Pneumatics online training course covers how work, force, and energy are applied to principles of pneumatics. Shows operating principles of reciprocating, positive displacement, rotary, and dynamic air compressors. Covers primary and secondary air treatment. Includes valves, logic devices, cylinders, and air motors. This course has no prerequisites. Basic Pneumatics is available in online maintenance training and course manual training formats.

Review a full training course list for Mechanical Systems Technician

Back to Instrumentation/Control Systems Technician Courses

Select Format

  • Online Course & Test $85.00

Please select a format.

TPC Training is authorized by IACET to offer 1.0 CEUs for the Basic Pneumatics training course.

Lesson 1 - Pneumatic Principles

Topics:

Fluid power systems; Force, weight, and mass; Pressure; Work and energy; Diffusion and dispersion; Compressibility; Laws of pneumatics; Leverage; Air properties and flow; Bernoulli's Law; Components

Learning Objectives:
– Explain how force is transmitted in a pneumatic system.
– Calculate force and work.
– List two factors that affect the results of pressure calculations.
– Explain pneumatic leverage.
– Briefly explain the physical laws affecting the behavior of a confined gas.


Lesson 2 - Reciprocating Compressors

Topics:

Compressor construction, classification, and operation; Single-, double-acting compressors; Cooling requirements; Lubrication; Controls

Learning Objectives:
– Differentiate between a positive-displacement compressor and a dynamic compressor.
– Describe the operation of a reciprocating compressor.
– List one advantage of using a multistage compressor.
– Identify the cooling arrangements for reciprocating compressors.
– Compare the operation of compressor controls in large and small units.


Lesson 3 - Rotary Compressors

Topics:

Vane, rotary-screw, low-pressure, high-volume, diaphragm, centrifugal, and axial-flow compressors; Compressor capacity; Accessories

Learning Objectives:
– Compare the power output of a single-stage vs a two-stage vane compressor.
– Describe the main types of positive-displacement rotary air compressors.
– Explain the advantages and disadvantages of both types of dynamic compressors.
– Describe four methods of controlling centrifugal compressor output.
– Tell how to compensate for a low-speed drive in rotary screw compressors.


Lesson 4 - Primary Air Treatment

Topics:

Preliminary filtering; Relative humidity; Effects of moisture; Moisture separators; Oil scrubbers; Air dryers and receivers; Using a nomograph

Learning Objectives:
– Describe techniques for cleaning compressor filters.
– Define relative humidity and dew point.
– Explain the effects of temperature and pressure on the air's ability to hold moisture.
– Describe aftercooler operation.
– Explain the functions of separators, oil scrubbers, and air dryers.


Lesson 5 - Secondary Air Treatment

Topics:

Contaminant separation and filtration; Filter classification and rating; Surface, depth, adsorption, and absorption filters; Lubricating the air

Learning Objectives:
– Describe the two main methods of contaminant separation.
– Explain how filters are classified.
– List contaminant particle sizes and particle contamination categories as they occur in filters.
– List applications for the most common types of filter media.
– Identify system location for lubrication equipment installation.


Lesson 6 - Piping, Hoses, and Fittings

Topics:

Piping requirements and dimensions; Safety; Connections; Metallic tubing; Tube bending, fittings, and installation; Hoses, fittings, and installation

Learning Objectives:
– State the importance of laminar flow.
– List the factors that affect pressure loss in a pipe.
– State direction and amount of slope for compressor discharge pipes.
– Discuss procedures for pipe, tube, and hose installation.
– Describe safe working procedures for disconnecting air hoses.


Lesson 7 - Directional Control Valves

Topics:

Manually and automatically operated valves; Control valve elements: spools, poppets, disks, and plates; Two-, three-, four-, and five-way valves; Accessories

Learning Objectives:
– Describe the four methods of identifying control valves.
– List four basic types of manually operated, two-way valves.
– Describe the operation of a two-position, direct acting, normally closed solenoid valve.
– Explain one major advantage of using a four-way valve.
– Describe the construction of a three-way valve.


Lesson 8 - Pressure-Control Valves

Topics:

Safety vs relief valves; Relief valve construction; Pressure regulators; Pilot-operated, remote-controlled regulators; Logic functions

Learning Objectives:
– List two ways a valve can control compressor pressure output.
– Describe construction of two basic types of pressure-relief valves.
– Contrast a pressure regulator with a pressure-relief valve.
– State the limit imposed by Federal Law on the pressure allowed when an air hose is used to blow off chips.


Lesson 9 - Pneumatic Cylinders

Topics:

Double-, single-acting cylinders; Two-piston cylinders; Cylinder construction, mounting, and selection; Performance charts; Cushioning

Learning Objectives:
– Tell the difference between pneumatic and hydraulic cylinders.
– Describe the construction and operation of a single-acting cylinder.
– State the purpose of an exhaust flow control metering valve.
– Describe the action of a pivoted cylinder.
– Explain the size relationship between a cylinder port and a valve port.


Lesson 10 - Pneumatic Motors and Rotary Actuators

Topics:

Motor rating; Selection factors: pressure, speed, torque, horsepower, reliability, and service life; Rotary vane and piston motors; Air boosters

Learning Objectives:
– Explain pneumatic motor classification.
– Define torque.
– Describe pneumatic motor construction.
– Calculate a motor's horsepower, given its torque and speed.
– Differentiate between a pneumatic motor and a rotary actuator.