Webinar on OSHA Violations

Life after an OSHA Citation: Turning a Black Mark into a Better Workplace



OSHA citations happen: the agency conducted 35,000 inspections in 2015 and cited 65,000 violations for a range of common hazards. The facilities that come back strongest from a citation are the ones that go beyond hazard correction to establish a culture of safe work practices.

Menu
Generating Steam in the Power Plant

Generating Steam in the Power Plant

Covers energy principles and boiler maintenance. The course then explains coal, oil, and natural gas combustion, and how to conserve energy through improved combustion control. Generating Steam in the Power Plant is available in course manual format.

TPC Training Systems is authorized by IACET to offer 0.5 CEUs for this program.

Review a full course list for Electrical Systems Technician

Select Format

  • Course Manual $57.00

Please select a format.

Lesson 1 - Transforming Energy into Work

Topics:

Energy and matter; Fuels; Combustion; Temperature and pressure; Heat transfer; Sensible and latent heat; Enthalpy

Learning Objectives:
– Define energy and describe the main forms of energy encountered in a power plant.
– Explain the process of combustion and list the three elements necessary for combustion to occur.
– Explain the principles of temperature and pressure measurement and describe the four scales on which temperature is measured.
– Describe the methods of heat transfer and the types of effects heat transfer can have on a material.
– Summarize the interrelationship of temperature, volume, and pressure in a gas.

Lesson 2 - Boiler Operation

Topics:

Types and characteristic of boilers; Water treatment; Boiler and cooling tower blowdown; Wastewater disposal; Thermodynamic efficiency

Learning Objectives:
– Compare the two basic types of boilers.
– Describe the characteristics by which boilers are classified.
– Explain the different processes by which water is treated for use in a boiler.
– Define blowdown and explain its importance in boiler operation.
– List the problems associated with wastewater disposal and describe how these problems are overcome.
– Describe the factors that affect boiler efficiency, as well as auxiliary equipment efficiency.
– Calculate thermodynamic efficiency.
– List practices that aid in energy conservation in all areas of the power plant.

Lesson 3 - Boiler Maintenance

Topics:

Soot and scale removal; Corrosion; Calibration; Cleaning; Maintaining auxiliaries; Valves; Piping; Pumps; Fans; Controls; Stacks and cyclones

Learning Objectives:
– Explain how the two types of sootblowers remove soot and slag from heat exchange surfaces.
– Describe how scale forms on boiler surfaces and list the three common removal methods.
– Explain why both hot-end and cold-end corrosion occur in a boiler, and tell what practices help prevent corrosion.
– Describe how refractory should be maintained and list the problems that can occur if it is not properly maintained.
– List the primary functions of boiler control systems and describe the three common types.
– Explain how to calibrate and clean boiler control systems and maintain compressed air systems.
– Summarize maintenance procedures for boiler auxiliaries such as pumps, valves, motors and electric circuits.


Lesson 4 - Combustion and How It Works

Topics:

Coal, oil and natural gas; Chemistry and efficiency of combustion; Burners; Flame color and adjustment; Coal firing; Ash analysis

Learning Objectives:
– Identify the different ranks of coal and describe how the makeup of coal affects its heating value.
– List the properties that are tested in a coal analysis.
– Summarize the properties of oil and natural gas fuels.
– Explain the combustion process in detail.
– Describe how to interpret and adjust a flame's characteristics in coal, oil, and gas burners.
– Describe the three types of coal firing systems.
– List the ways in which combustion efficiency is measured.


Lesson 5 - Steam Generation

Topics:

Temperature/pressure/volume relationships; Superheating; Boiler water circulation; Conserving energy; Blowdown; Makeup water

Learning Objectives:
– Trace the flow of water and steam through the boiler system.
– Explain the relationship between temperature and pressure and explain why superheated steam has a higher quality than saturated steam.
– Read a steam table properly and apply its information to a boiler system.
– Compare natural circulation boilers with forced circulation boilers, and explain how pressure and temperature affect the type of boiler used.
– Describe the process of operating a high-pressure boiler at low pressure.
– Describe how proper maintenance of steam traps, valves, packing, flanges, and insulation improve the energy conservation rate in a boiler system.

© Copyright 2017 TPC Training SYSTEMS. All rights reserved